standard fixture products

  • Air-Glide moves anvil on LNL fixture platesAir-Glide w/ anvil on LNL fixture plates

    Air-Ride video pic

    AIR-GLIDE™ for LNL Plates – Inch Loc-N-Load™ fixture plates can be ordered with air assist.  Let your CMM and fixture plates do the heavy work. With a flip of a switch and one pinky finger, inspectors can easily glide the weight of an anvil across the granite!

    Standard Loc-N-Load ™ Docking Rails

    LNL-DOCK-12 Docking Rail 2 x 12”  -$280
    LNL-DOCK-18 Docking Rail 2 x 18”  - $295
    LNL-DOCK-30 Docking Rail 2 x 30”  - $360      

    Loc-N-Load™ PLATES With AIR GLIDE Feature

    LNL-PLT-1218-AIR LNL Plate —AIR GLIDE 12 x 18”     -$  999
    LNL-PLT-1818-AIR LNL Plate —AIR GLIDE 18 x 18”    -$1,699
    LNL-PLT-1824-AIR LNL Plate —AIR GLIDE ** 18 x 24”  -$1,799
    LNL-PLT-2424-AIR LNL Plate —AIR GLIDE ** 24 x 24”  -$1,899
    LNL-PLT-2436-AIR LNL Plate —AIR GLIDE ** 24 x 36”   -$1,999


  • Fixture-up.com, Bundle w/12" Rail, CMM clamps, inspection, CMM breadboard, CMM Fixture, CMM Fixture Clamps, CMM Fixture plate, CMM Plate, Fast-swap fixture plates, Fixture plate, fixture-up, fixtureworxinspection, inspection fixture products, magnetic fixture plates, Multi-sensor inspection fixtures, stand-offs, Vision inspection plates, Work Holding Kits, Metrology fixtures, Fixturing, Metrology, custom fixturing12" Bundle with Starter Kit

    12″ BUNDLED CMM Fixture System PLUS 50+ pc. Starter Clamp  Kit

    Bundle Includes
    (1) LNL-Dock-12, Docking Rail 12″
    (2) LNL-PLT-0606, Loc-N-Load plates 6×6″
    (1) LNL-ANGL-0306, Angle Plate / Stop 6″
    (1) LNL-QUAL-PLT, Indicator Ball Plate 6 x 4″

    PLUS
    1 ea. TR-KIT-03  Starter Kit, 50+ pc work holding kit.

    This smaller fixture system is perfect for smaller CMM inspection applications.  Loc-N-Load™  combinations of fixture rails, plates and clamps create affordable, repeatable, and durable fixtures that reduce setup time and process more parts per shift.


  • TR-03 Starter Kit , 50 pcs18" Bundle w/ Starter Kit

    18″ BUNDLED CMM Fixture Plate System (18″ Rail)  and Starter Work Holding Kit.
    (SYS10:DK18TR03)

    Bundle Includes
    (1) LNL-Dock-18, 18″ docking rail,
    (1) LNL-PLT-0606, 6×6″ Loc-N-Load plate,
    (1) LNL-PLT-0612, 6×12″ Loc-N-Load plate,
    (1) LNL-ANGL-0306, 6″ Angle Plate / Stop,
    (1) LNL-QUAL-PLT,  6 x 4″ Indicator Ball Plate,

    Plus
    (1) TR-KIT-03  Inspection Arsenal™ 40+ piece workholding Starter Kit with non-marring hold downs, v-blocks, stops, and stand-offs.

    Affordable enough to add to each CMM.


  • Enhanced Standoff for CMMSTOFE Kit Plate

    STOFE-SET-30M     $789

    Enhanced Standoff for CMM

    Enhanced Standoff VIDEO

    Enhance other work holding with adjustable stand-offs that can be angled in any direction.  The high quality stand-offs and height adjusters included in this set add flexibility to inspection setups. Plastic and steel with M6 threads.  Component diameters of 0.50″ and 0.75″, 25mm ht.
    PLATE SOLD SEPARATELY.

     
    16-Pc. ENHANCED Set, Adjustable Standoffs/ Height Adjusters
         Part # and Description Qty
    STAJ-500,  0.50″ dia. Adjustable Stand-off 2
    STAJ-750, 0.75″ dia. Adjustable Stand-off 2
    STOF-KNCL-750, 0.75″ dia. x 1″ h. Adjustable Knuckle 2
    STOF-ADJ, Plastic Ht. Adjuster for Stand-off Set 2
    THUMB 12mm, screws (Metric) 2
    STOF-CONE, Plastic Cone for Stand-off Set 2
    STOF-050-100, 0.50″ dia. x 25mm h. Stand-off 2
    STOF-075-100, 0.75″ dia. x 25mm h. Stand-off 2
          TOTAL 16
    PLUS 5S FOAM DRAWER INSERTS

  • CMM Inspection for 3D gagesGage Arm LNL-Dock-2412

    The 24 x 12″ Docking Rail is for use with portable Gage fixture systems.  Add Loc-N-Load™ interlocking fixture plates which quickly secure and release with the use of magnets.  Add multiple fixtures to speed up inspections on the floor.

    LNL-DOCK-2412 24 x 12″ Docking Plate


  • CMM Inspection for 3D gagesLNL-DOCK-M540 for Gage Arm

    The 540 x 300mm Docking Plate is for use with portable 3D Gage Arm fixture systems.  Add Loc-N-Load™ interlocking fixture plates which quickly secure and release with the use of magnets.  Add multiple fixtures to speed up inspections on the floor.

    LNL-DOCK-M540300


  • DOCK 18_Rev2Dock 12-18-30

    The 3 Docking Rails (Inch – 12, 18 or 30″) bolt in place to your granite.  Add Loc-N-Load™ interlocking fixture plates which quickly secure and release with the use of magnets.  Keep all more firmly secure by adding an Endcap (18, 30″) to the fixture.  To order, select from these assorted sizes below.

    2 x 12″ Docking Rail – $280
    2 x 18″ Docking Rail – $295
    2 x 30″ Docking Rail – $360

    2 x 18″ Endcap – $210
    2 x 30″ Endcap – $285


  • 12x12 platePlate Dimensions

    Fast-swap, interlocking Loc-N-Load™ CMM fixture plates secure and release quickly for repeatable setups with the use of magnets. Inspectors can program several  small setups, multi-part fixtures,  or add large parts that span multiple plates.  1/2″ thick, 1/4-20 holes available in various sizes with customer sizes available upon request.

    6″x6″,   $169.00
    6″x12″, $240.00
    6″x18″, $300.00
    12×12″, $380.00
    12×18″, $530.00

    To add to your order, see Docking Rails/Endcaps.

    Sample set-up photos

     

    Interlocking CMM Fixture Plates – .5 thick, 1/4-20 holes. Select the plate dimensions below.


  • Metric Fixture PlatesMetric Fixture Plates

    Fast-swap, interlocking Loc-N-Load™ METRIC CMM fixture plates secure and release quickly for repeatable setups with the use of magnets. Inspectors can program several  small setups, multi-part fixtures,  or add large parts that span multiple plates.  13mm thick, M6 thread, 20 x 20mm hole pattern; available in various sizes with custom sizes available upon request.

    180 x 180mm, $  290
    180 x 360mm, $  480
    360 x 360mm, $  790
    360 x 540mm, $1,140

    To add to your order, see Docking Rails and Accessory Plates.

    Sample set-up photos

    Interlocking CMM Fixture Plates – 13mm thick, M6 holes. Select the plate dimensions below.


  • Trigger-Finger Tall3'' Steel Shaft

    3” Steel, Black Oxide coating with male and female ¼-20 thread ends,  Use as stand-offs for any clamping components.

    Metric: with male and female M6 thread ends.


  • Trigger-Finger Tall3'' Post METRIC

    3” Steel, Black Oxide coating with male and female ¼-20 thread ends,  Use as stand-offs for any clamping components.

    Metric: with male and female M6 thread ends.


  • sliding-loc-dimsLow profile

    Sliding Stop™ Low-profile Stop, Metric

    The Sliding Stop™ was primarily designed to assist in vacuum or other low profile workholding applications allowing customers to run at higher feeds and speeds. Depending on use and orientation one or two 6mm  fasteners are required to secure the clamp. The Sliding Stop™ incorporates a scallop on one edge of the Stop which aids in gripping certain materials and better viewing with Vision Systems.  Set of 2