Rails and stops

  • Air-Glide moves anvil on LNL fixture platesAir-Glide w/ anvil on LNL fixture plates

    Air-Ride video pic

    AIR-GLIDE™ for LNL Plates – Inch Loc-N-Load™ fixture plates can be ordered with air assist.  Let your CMM and fixture plates do the heavy work. With a flip of a switch and one pinky finger, inspectors can easily glide the weight of an anvil across the granite!

    Standard Loc-N-Load ™ Docking Rails

    LNL-DOCK-12 Docking Rail 2 x 12”  -$280
    LNL-DOCK-18 Docking Rail 2 x 18”  - $295
    LNL-DOCK-30 Docking Rail 2 x 30”  - $360      

    Loc-N-Load™ PLATES With AIR GLIDE Feature

    LNL-PLT-1218-AIR LNL Plate —AIR GLIDE 12 x 18”     -$  999
    LNL-PLT-1818-AIR LNL Plate —AIR GLIDE 18 x 18”    -$1,699
    LNL-PLT-1824-AIR LNL Plate —AIR GLIDE ** 18 x 24”  -$1,799
    LNL-PLT-2424-AIR LNL Plate —AIR GLIDE ** 24 x 24”  -$1,899
    LNL-PLT-2436-AIR LNL Plate —AIR GLIDE ** 24 x 36”   -$1,999


  • CMM Inspection for 3D gagesGage Arm LNL-Dock-2412

    The 24 x 12″ Docking Rail is for use with portable Gage fixture systems.  Add Loc-N-Load™ interlocking fixture plates which quickly secure and release with the use of magnets.  Add multiple fixtures to speed up inspections on the floor.

    LNL-DOCK-2412 24 x 12″ Docking Plate


  • DOCK 18_Rev2Dock 12-18-30

    The 3 Docking Rails (Inch – 12, 18 or 30″) bolt in place to your granite.  Add Loc-N-Load™ interlocking fixture plates which quickly secure and release with the use of magnets.  Keep all more firmly secure by adding an Endcap (18, 30″) to the fixture.  To order, select from these assorted sizes below.

    2 x 12″ Docking Rail – $280
    2 x 18″ Docking Rail – $295
    2 x 30″ Docking Rail – $360

    2 x 18″ Endcap – $210
    2 x 30″ Endcap – $285


  • LNL-18in dockMetric Docking Rails

    The 3 Metric docking rails (360, 540 or 720mm) bolt in place to your granite.  Aluminum, 13mm thick. Add Loc-N-Load™ interlocking fixture plates which quickly secure and release with the use of magnets. To order, select from these assorted sizes in the dropbox below.

    50 X 360mm Docking Rail – $340
    50 X 540mm Docking Rail – $380
    50 X 720mm Docking Rail – $490


  • CMM Inspection for 3D gagesPortable Gage fixture system

    Pre-configured for all portable gage arms and laser trackers.  1/2″ thick clear anodized aluminum, 1 x 1″ hole pattern, 1/4-20 thread.

    (1)  24 x 12″ Base Plate,
    (2)  6 x 6″ Loc-N-Load™ Plates,
    (2)  6 x 12″ Loc-N-Load™ Plates,
    (1) 12 x 18″ Loc-N-Load™ Plate,
    (1) Angle Plate,
    PLUS
    (1) TR-KIT-02, Complete Kit, 69-pc work holding kit.


  • PDQ Case Study Article Jan 2015 012V-Blocks with magnets, for CMM inspections

    V-Block

    $99.90

    V-Block, magnetic, aluminum stand-off, Set of two. Use vertically or horizontally as a stop to create simple setups. Add 3″ steel shafts to gain height. Sizes: 90° included angle.


  • ss-07Rails & Stops Set

    Precision cut from 14 gauge brushed stainless steel, these alignment rails and stops are versatile and affordable. Use them on most CMM fixture plates. Includes standard button head screws. 1/4-20 threads.


  • ss-01-os

    Simple-Stop™ for Vision, with serrated edge.  Measures 2.75″ x 2.75″.

    Precision cut from 14 gauge brushed stainless steel with a serrated edge.  This alignment stop for vision systems is versatile and affordable. Use on most CMM fixture plates. Includes standard button head screws. 1/4-20 threads.

    All products are high quality and proudly made in the USA!

     

    Includes standard button head screws. 1/4-20 threads.


  • ss-01m
    Simple-Stop™ for Vision, with serrated edge.  Measures 70 x 70mm. Precision cut from 14 gauge brushed stainless steel with a serrated edge.  This alignment stop for vision systems is versatile and affordable. Use on most CMM fixture plates. Includes standard button head screws. M6 threads. All products are high quality and proudly made in the USA!

    Includes standard button head screws. M6 threads.


  • SIST-RS-100

    Precision cut from 14 gauge brushed stainless steel, these alignment rails and stops are versatile and affordable. Use them on most CMM fixture plates. Includes standard button head screws. M6 threads.