fixtureworx

  • Air-Glide moves anvil on LNL fixture platesAir-Glide w/ anvil on LNL fixture plates

    Air-Ride video pic

    AIR-GLIDE™ for LNL Plates – Inch Loc-N-Load™ fixture plates can be ordered with air assist.  Let your CMM and fixture plates do the heavy work. With a flip of a switch and one pinky finger, inspectors can easily glide the weight of an anvil across the granite!

    Standard Loc-N-Load ™ Docking Rails

    LNL-DOCK-12 Docking Rail 2 x 12”  -$280
    LNL-DOCK-18 Docking Rail 2 x 18”  - $295
    LNL-DOCK-30 Docking Rail 2 x 30”  - $360      

    Loc-N-Load™ PLATES With AIR GLIDE Feature

    LNL-PLT-1218-AIR LNL Plate —AIR GLIDE 12 x 18”     -$  999
    LNL-PLT-1818-AIR LNL Plate —AIR GLIDE 18 x 18”    -$1,699
    LNL-PLT-1824-AIR LNL Plate —AIR GLIDE ** 18 x 24”  -$1,799
    LNL-PLT-2424-AIR LNL Plate —AIR GLIDE ** 24 x 24”  -$1,899
    LNL-PLT-2436-AIR LNL Plate —AIR GLIDE ** 24 x 36”   -$1,999


  • Cmm clamps inspection, CMM breadboard, CMM Fixture, CMM Fixture Clamps, CMM Fixture plate, CMM Plate, Fast-swap fixture plates, Fixture plate, fixture-up, fixtureworxinspection, inspection fixture products, magnetic fixture plates, Multi-sensor inspection fixture plates, stand-offs, Vision inspection plates, Work Holding Kits, Metrology fixtures, Fixturing, Metrology, custom fixturing18" Bundle w/WORKS Kit

    18″ BUNDLED CMM Fixture Plate System (18″ Rail)  PLUS 145 pc. the ‘WORKS’ Work Holding Kit SYS10: DK18TR01

    Bundle Includes
    (1) LNL-Dock-18, 18″ docking rail,
    (1) LNL-PLT-0606, 6×6″ Loc-N-Load plate,
    (1) LNL-PLT-0612, 6×12″ Loc-N-Load plate,
    (1) LNL-ANGL-0306, 6″ Angle Plate / Stop,
    (1) LNL-QUAL-PLT,  6 x 4″ Indicator Ball Plate,

    Plus
    (1) TR-KIT-01  Inspection Arsenal™ 145-piece the ‘WORKS’ Work Holding Kit with non-marring hold downs, v-blocks, stops, and stand-offs. Affordable enough to add to each CMM.


  • Bundle_30_line230" Bundle w/ WORKS Kit, Loc-N-Load™

    30″ BUNDLED CMM Fixture Plate System (30″ Rail) PLUS  the ‘WORKS’ Work Holding Kit. (SYS20: DK30TR01)

    Bundle Includes
    (1) LNL-Dock-30, 30″ docking rail,
    (1) LNL-PLT-0606, 6×6″ Loc-N-Load plate,
    (1) LNL-PLT-0612, 6×12″ Loc-N-Load plate,
    (1) LNL-PLT-1212, 12×12″ Loc-N-Load plate,
    (1) LNL-ANGL-0306, 6″ Angle Plate / Stop,
    (1) LNL-QUAL-PLT,  6 x 4″ Indicator Ball Plate,

    Plus
    (1) TR-KIT-01  Inspection Arsenal™ 145 piece the ‘WORKS’ Work Holding Kit with non-marring hold downs, v-blocks, stops, and stand-offs. Affordable enough to add to each CMM.


  • CMM Inspection for 3D gagesGage Arm LNL-Dock-2412

    The 24 x 12″ Docking Rail is for use with portable Gage fixture systems.  Add Loc-N-Load™ interlocking fixture plates which quickly secure and release with the use of magnets.  Add multiple fixtures to speed up inspections on the floor.

    LNL-DOCK-2412 24 x 12″ Docking Plate


  • CMM Inspection for 3D gagesLNL-DOCK-M540 for Gage Arm

    The 540 x 300mm Docking Plate is for use with portable 3D Gage Arm fixture systems.  Add Loc-N-Load™ interlocking fixture plates which quickly secure and release with the use of magnets.  Add multiple fixtures to speed up inspections on the floor.

    LNL-DOCK-M540300


  • Adapter for breadboardAdapter Plate-M
    Now it’s easier than ever to adapt your inspection fixtures to the LEANest option on the market.  Fastening this 13mm thick aluminum adapter plate to existing fixtures allows you to “dock” them into the Loc-N-Load docking rail.  Make use of existing fixtures while adopting the newest LEAN concepts for inspection.

  • DOCK 18_Rev2Dock 12-18-30

    The 3 Docking Rails (Inch – 12, 18 or 30″) bolt in place to your granite.  Add Loc-N-Load™ interlocking fixture plates which quickly secure and release with the use of magnets.  Keep all more firmly secure by adding an Endcap (18, 30″) to the fixture.  To order, select from these assorted sizes below.

    2 x 12″ Docking Rail – $280
    2 x 18″ Docking Rail – $295
    2 x 30″ Docking Rail – $360

    2 x 18″ Endcap – $210
    2 x 30″ Endcap – $285


  • LNL-18in dockMetric Docking Rails

    The 3 Metric docking rails (360, 540 or 720mm) bolt in place to your granite.  Aluminum, 13mm thick. Add Loc-N-Load™ interlocking fixture plates which quickly secure and release with the use of magnets. To order, select from these assorted sizes in the dropbox below.

    50 X 360mm Docking Rail – $340
    50 X 540mm Docking Rail – $380
    50 X 720mm Docking Rail – $490


  • Loc-N-Load™ Inspection Fixture for Optical ComparatorOC Dock 180

    6″ Optical Comparator Docking Rail

     

    This 180mm docking rail is available individually.  Combined with the 180 x 360mm fixture plates, are perfect for your optical comparators’ inspection applications.

    Loc-N-Load™  fixture rails, plates and workholding clamps create affordable, repeatable, and durable fixtures that reduce setup time and process more parts per shift.  Plates can be dedicated and kept with the job box for fast, repeatable setups.  Add multiple docking rails, plates and workholding as needed.

    Also available are 180 x 180 fixture plates, and assorted workholding kits.


  • Loc-N-Load™ Inspection Fixture for Optical ComparatorOC Dock 06

    6″ Optical Comparator Docking Rail

     

    This 6″ docking rail is available individually.  Combined with the 6 x 12″ fixture plates, are perfect for your optical comparators’ inspection applications.

    Loc-N-Load™  fixture rails, plates and workholding clamps create affordable, repeatable, and durable fixtures that reduce setup time and process more parts per shift.  Plates can be dedicated and kept with the job box for fast, repeatable setups.  Add multiple docking rails, plates and workholding as needed.

    Also available are 6×6″ and 6×18″ fixture plates, and assorted workholding kits.


  • CMM Inspection for 3D gagesPortable Gage fixture system

    Pre-configured for all portable gage arms and laser trackers.  1/2″ thick clear anodized aluminum, 1 x 1″ hole pattern, 1/4-20 thread.

    (1)  24 x 12″ Base Plate,
    (2)  6 x 6″ Loc-N-Load™ Plates,
    (2)  6 x 12″ Loc-N-Load™ Plates,
    (1) 12 x 18″ Loc-N-Load™ Plate,
    (1) Angle Plate,
    PLUS
    (1) TR-KIT-02, Complete Kit, 69-pc work holding kit.


  • Trigger-Finger Tall3'' Steel Shaft

    3” Steel, Black Oxide coating with male and female ¼-20 thread ends,  Use as stand-offs for any clamping components.

    Metric: with male and female M6 thread ends.